After a month of building, testing, revising, rebuilding, and waiting for parts š Iām really proud of how my first muscle car turned out.
āLego already made oneā check slide 3
The drop is this Friday at 19:00 CET, when the timer on my website hits zero.
There are currently 170 people on the waiting list and Iām only releasing 35 sets, so make sure youāre on time if you want one.
Iāll announce the final pricing tomorrow once Iāve finished checking the sourcing costs.
One thing I still need your help with is the color. Lime looks amazing, but some of the parts are difficult and expensive to source. Because of that, lime will be very limited and the standard version will most likely be a more accessible color like red or black.
Thanks to everyone who followed and engaged with the design process. This was a little outside of what I normally build, but I had a lot of fun designing my first muscle car. Definitely not the last.
When the bigger Technic version came out in these colors, I knew I had to try them on my own Creator-style MOC too. The Spear is basically a Jesko attack and Absolut combined with some extraās. So once it was announced I think I had it done within a week. Only the custom sticker heet took a bit of time to design. @nv_carmocs (on IG) and brickstickershop.com always are a great help when it comes to stickers! It couldnāt be done without them.
My version uses around 1,200 pieces, but Iāve tried to pack as much functionality into that smaller scale as possible: working steering, opening doors, opening front and rear clamshells, plus a removable roof that can actually be stored in the front.
The one thing you wonāt find is the Ghost Mode mechanism from the bigger Technic model, where opening the rear also opens the doors. At this scale, that was one step too far.
What Iām especially happy about is the steering. Fitting a full working steering system into a Creator-style model this size is something Iāve been working on, and itās a feature Iām now trying to include in every new design.
Big thanks to @vinkie_116, (on IG) my tester, who built both models and put them side by side for these shots. Seeing the two interpretations together is pretty unreal.
The creator style model now is available on my website.
Taking a little break from the videos while I finish up the last 8 commissions. That means the videos are taking a bit of a back seat for now, but theyāll be back soon.
In the meantime, here are a few photos of some older builds: the Pagani Huayra, Huayra BC, the newly finished Mercedes-Benz SLS AMG, and the SLS AMG Black Series.
Back by popular demand, some of my earlier designs will be making a return to the shop. Theyāve been unavailable for a while, so it felt like the right time to bring a few of them back.
The final version is here. The updated sticker sheets are in with the white balance corrected and an improved rear wing sticker. After fixing a few small details, including a typo, a couple of missing 3D printed parts, and the sticker colors, this is the version Iām proud to call finished.
This is my take on what the 992 GT3 RS could look like if I were designing it for LEGO with no limitations.
Porsche is one of the hardest brands to recreate in bricks. The real car relies on smooth, flowing curves, while LEGO is naturally blocky. Capturing those proportions and body lines was the biggest challenge of this project, and I think thatās what makes the final result so satisfying.
This has become one of my favorite models Iāve ever designed. Iām incredibly proud of how it turned out, and I canāt wait to see people building it.
That means itās printing time! The custom parts are being manufactured, the final sticker sheets have been ordered, the parts lists are finished, and brick sourcing is being prepped.
Thank you all for your patience and support throughout this project. Weāre almost there! I also have a little extra for everyone who pre-ordered, so hopefully it feels a bit like Christmas when your package arrives.
This is my LEGO rendition of what is probably one of the most requested cars Iāve ever built. So many of you asked for it that I decided to make it this yearās community design, the one model each year that you get to choose.
This project was both challenging and incredibly fun. I started the first prototype in red, but after the community vote, white came out on top. In the end, I couldnāt choose, so I built both.
Itās been a long time since Iāve been this excited about one of my own models. Everything just came together. I went with a 15-stud-wide front and a 16-stud-wide rear to capture the real carās proportions as closely as possible. It wasnāt an easy shape to get right since the sides look deceptively straight, but Iām really happy with how it turned out. It might even be my best design so far.
The model is built from 1,267 genuine LEGO parts, combined with a few of my own engineered custom parts, including the wheels, to add even more realism.
If you look closely, youāll notice the stickers on the white version are slightly too bright. That will be corrected before release. Thereās also one small mistake hidden in the sticker sheet. Can you spot it? š¤
A huge thank you to everyone who pre-ordered this design. The support, enthusiasm, and trust you continue to show means more than you know.
The model releases on the 24th and, unlike previous releases, it will remain available permanently. Iām also working on an optional wheel pack, as shown in the last slide.
I made the red version, changed the last weird colors out from the prototype that you can see In the last slide. This build has been so fun. Iāll get some quality pics soon!
I wanted to take this moment to thank everyone thatās supporting the channel! Itās great to see everyone loving the designs and leaving their opinions. Extra thanks to all people who already placed a pre order on this. Makes me happy to see! Iāll be doing instructions on this soon and have them tested. Then the product is ready for you guys.
3DSupercarBricks
The Dodge Challenger in LEGO is finally finished!
After a month of building, testing, revising, rebuilding, and waiting for parts š Iām really proud of how my first muscle car turned out.
āLego already made oneā check slide 3
The drop is this Friday at 19:00 CET, when the timer on my website hits zero.
There are currently 170 people on the waiting list and Iām only releasing 35 sets, so make sure youāre on time if you want one.
Iāll announce the final pricing tomorrow once Iāve finished checking the sourcing costs.
One thing I still need your help with is the color. Lime looks amazing, but some of the parts are difficult and expensive to source. Because of that, lime will be very limited and the standard version will most likely be a more accessible color like red or black.
Thanks to everyone who followed and engaged with the design process. This was a little outside of what I normally build, but I had a lot of fun designing my first muscle car. Definitely not the last.
#LEGO #DodgeChallenger #LEGOMOC #Dodge #legododgechallenger
What color would your Challenger be?
17 hours ago | [YT] | 590
View 17 replies
3DSupercarBricks
Koenigsegg Sadairās Spear in Lego
When the bigger Technic version came out in these colors, I knew I had to try them on my own Creator-style MOC too. The Spear is basically a Jesko attack and Absolut combined with some extraās. So once it was announced I think I had it done within a week. Only the custom sticker heet took a bit of time to design. @nv_carmocs (on IG) and brickstickershop.com always are a great help when it comes to stickers! It couldnāt be done without them.
My version uses around 1,200 pieces, but Iāve tried to pack as much functionality into that smaller scale as possible: working steering, opening doors, opening front and rear clamshells, plus a removable roof that can actually be stored in the front.
The one thing you wonāt find is the Ghost Mode mechanism from the bigger Technic model, where opening the rear also opens the doors. At this scale, that was one step too far.
What Iām especially happy about is the steering. Fitting a full working steering system into a Creator-style model this size is something Iāve been working on, and itās a feature Iām now trying to include in every new design.
Big thanks to @vinkie_116, (on IG) my tester, who built both models and put them side by side for these shots. Seeing the two interpretations together is pretty unreal.
The creator style model now is available on my website.
Happy building!
#lego #koenigsegg #sadairsspear #legokoenigsegg #moc
1 week ago | [YT] | 1,416
View 25 replies
3DSupercarBricks
The 992 is now available in 5 colors! Enjoy ;)
3 weeks ago | [YT] | 1,466
View 18 replies
3DSupercarBricks
You can now sign up for the next drop, the dodge challenger. Iām gonna release 35 units. Thatās it.
3 weeks ago | [YT] | 233
View 1 reply
3DSupercarBricks
Taking a little break from the videos while I finish up the last 8 commissions. That means the videos are taking a bit of a back seat for now, but theyāll be back soon.
In the meantime, here are a few photos of some older builds: the Pagani Huayra, Huayra BC, the newly finished Mercedes-Benz SLS AMG, and the SLS AMG Black Series.
Back by popular demand, some of my earlier designs will be making a return to the shop. Theyāve been unavailable for a while, so it felt like the right time to bring a few of them back.
Which one would you like to see return first?
1 month ago | [YT] | 2,028
View 32 replies
3DSupercarBricks
The Porsche 911 (992) GT3 RS in LEGO.
The final version is here. The updated sticker sheets are in with the white balance corrected and an improved rear wing sticker. After fixing a few small details, including a typo, a couple of missing 3D printed parts, and the sticker colors, this is the version Iām proud to call finished.
This is my take on what the 992 GT3 RS could look like if I were designing it for LEGO with no limitations.
Porsche is one of the hardest brands to recreate in bricks. The real car relies on smooth, flowing curves, while LEGO is naturally blocky. Capturing those proportions and body lines was the biggest challenge of this project, and I think thatās what makes the final result so satisfying.
This has become one of my favorite models Iāve ever designed. Iām incredibly proud of how it turned out, and I canāt wait to see people building it.
#lego #porsche #911gt3rs #legotechnic #legocar
1 month ago | [YT] | 1,950
View 43 replies
3DSupercarBricks
Dear followers!
The testing for the 992 is finally complete!
That means itās printing time! The custom parts are being manufactured, the final sticker sheets have been ordered, the parts lists are finished, and brick sourcing is being prepped.
Estimated dispatch times:
* Builder kits (custom parts + instructions): 1-2 weeks
* Complete kits: 2-3 weeks
Thank you all for your patience and support throughout this project. Weāre almost there! I also have a little extra for everyone who pre-ordered, so hopefully it feels a bit like Christmas when your package arrives.
I canāt wait to see your finished builds!
2 months ago | [YT] | 1,258
View 18 replies
3DSupercarBricks
My Lego Porsche 911 (992) GT3 RS
This is my LEGO rendition of what is probably one of the most requested cars Iāve ever built. So many of you asked for it that I decided to make it this yearās community design, the one model each year that you get to choose.
This project was both challenging and incredibly fun. I started the first prototype in red, but after the community vote, white came out on top. In the end, I couldnāt choose, so I built both.
Itās been a long time since Iāve been this excited about one of my own models. Everything just came together. I went with a 15-stud-wide front and a 16-stud-wide rear to capture the real carās proportions as closely as possible. It wasnāt an easy shape to get right since the sides look deceptively straight, but Iām really happy with how it turned out. It might even be my best design so far.
The model is built from 1,267 genuine LEGO parts, combined with a few of my own engineered custom parts, including the wheels, to add even more realism.
If you look closely, youāll notice the stickers on the white version are slightly too bright. That will be corrected before release. Thereās also one small mistake hidden in the sticker sheet. Can you spot it? š¤
A huge thank you to everyone who pre-ordered this design. The support, enthusiasm, and trust you continue to show means more than you know.
The model releases on the 24th and, unlike previous releases, it will remain available permanently. Iām also working on an optional wheel pack, as shown in the last slide.
I hope you enjoy this one as much as I enjoyed designing it. ā¤ļø
#moc #3dsupercarbricks #lego #porsche911gt3rs #legogt3rs
2 months ago | [YT] | 1,223
View 27 replies
3DSupercarBricks
I made the red version, changed the last weird colors out from the prototype that you can see In the last slide. This build has been so fun. Iāll get some quality pics soon!
I wanted to take this moment to thank everyone thatās supporting the channel! Itās great to see everyone loving the designs and leaving their opinions. Extra thanks to all people who already placed a pre order on this. Makes me happy to see! Iāll be doing instructions on this soon and have them tested. Then the product is ready for you guys.
Anyway here are some quick pics on my desk.
Enjoy :)
2 months ago | [YT] | 1,080
View 23 replies
3DSupercarBricks
Tomorrow Iām dropping a new vid on this beast. This is one of my best mocs so far, ngl. Let me know what you think!
2 months ago | [YT] | 1,325
View 30 replies
Load more