A wide selection of educational videos about all kinds of borescopes for remote visual inspections (NDT) including videoscopes, pipe cameras, sewer and drain cameras, fiberscopes and micro borescopes.
What should be given the most importance when choosing a drain inspection camera?
A) Image quality B) Cable length C) Flexibility through tight bends D) Camera head size
Here’s something worth considering:
A camera will not be much helped even if it has a long push cable and good image quality since the camera cannot reach the inspection area.
The MiniFlex 2 19mm is designed to be used with pipes having a small diameter and for difficult bends, for example the ones present in some P-trap setups.
Because of its flexible neck it is able to handle difficult routes, and the built-in 512 Hz sonde enables the position of the camera head to be determined using a locator.
Would you rather pay for an inspection camera or pay for the guesswork?
When the problem is inside a pipe, behind a wall, inside a machine, or somewhere you simply can’t see, the right inspection camera can change the job completely.
Our Clearance Collection makes professional inspection equipment easier to put to work without paying regular price.
You’ll find selected:
🔎 Video borescopes 🔄 Articulating borescopes 🚰 Drain inspection cameras 📹 Fiberscopes 🛠️ Probes and accessories
Some systems are currently discounted by thousands of dollars.
If you’ve been putting off an equipment upgrade, check the available inventory before your preferred configuration is gone.
⚠️ Can you use a standard inspection camera in a hazardous environment? Image quality and reach are only part of the equation. In areas where flammable gases or vapors may be present, the inspection equipment must also be suitable for the operating environment. Different access challenges require different solutions: 🔍 VIDEOSCOPE XT: close-range inspection inside machinery and vessels 🔍 SoloPRO+ ExZ1: ATEX Zone 1 push camera for 2–24" pipelines and working lengths up to 330 ft (100 m) 🔍 Proteus ExZ1: robotic crawler for larger and longer pipelines The right choice depends on where you’re inspecting, what you need to reach, and the hazardous-area requirements.
Finding a defect is one thing. Measuring it accurately is what helps you decide what to do next. Meet the FIBERSCOPE iX3D 3D Measurement Video Borescope, designed for remote visual inspections where defect dimensions matter.
Using stereo vision, iX3D generates 3D surface data inside hard-to-reach components. Inspectors can measure length, depth, height, distance and area, then visually check how the measurement was made. In this video, see how iX3D helps make 3D measurement practical in the field: 🔹 6 measurement methods: Point to Point, Point to Line, Point to Plane, Multipoint, Max Point to Line and Plane 🔹 360° 3D model: rotate and zoom the inspected surface to verify measurement-point placement 🔹 Color-coded 3D depth map: visualize changes in surface geometry 🔹 Measurement-data check: areas without sufficient 3D data are highlighted 🔹 0° and 90° stereo probes: switch between forward and side views for different inspection geometries 🔹 4 mm and 6 mm probes: with four-way articulation and working lengths up to 7.5 m 🔹 Fast workflow: measurement results in less than one minute
iX3D is designed for demanding NDT and RVI applications, including aircraft engines and turbines, helicopter gearboxes, pipelines, heat exchangers, wind turbines, gas turbines, power-generation equipment and production facilities.
When a conventional borescope can show you where the defect is, iX3D helps answer the next question: How big is it, and can you verify the measurement?
Learn more about the FIBERSCOPE iX3D at FIBERSCOPE.net.
You can see the blockage—but how far into the pipe is it? Estimating distance from a zoomed image can lead to unnecessary crawler deployment, poorly targeted cleaning or another visit to the same manhole. The CYCLOPS TZ now comes with a preinstalled laser rangefinder. It helps crews connect a visible observation to a target-distance reference during sewer mainline, storm drain, and culvert screening. First, find the problem with Full HD imaging and 30× optical zoom. Then determine where it is before deciding which equipment to bring next. Would distance information change how your crew plans preliminary inspections?
When Conventional CCTV Crawlers Stop, What Comes Next? 🌊🤖
Flooded pipelines, active flow, heavy sediment, and large-diameter sewers can quickly turn a routine inspection into a costly challenge. When a crawler loses traction, valuable condition data can be lost before the inspection is even complete.
The TRACER X20 Floating Pipe Inspection Robot was designed for exactly these environments. Its patented Archimedes screw floating propulsion system helps navigate conditions where traditional wheeled crawlers may struggle, while the HD PTZ camera, optional Sonar, and 2D LiDAR provide detailed inspection data for informed maintenance decisions.
Whether you're inspecting municipal sewers, stormwater systems, siphons, or large pipelines, the goal remains the same: collect reliable data with fewer limitations in the field.
‼️Summer is the busiest season for pool service teams — and the worst time for a pool to go down.
When an in-ground pool loses water or shows signs of a blockage, the real challenge is locating the problem before you dig. Underground pool piping runs through tight elbows and multiple 90° bends — exactly where most inspection cameras stop short.
The MiniFlex 19 was built to tackle these challenges. Its patented flexible neck moves smoothly through consecutive bends in small-diameter pool piping—places other cameras cannot reach. The built-in 512 Hz sonde enables precise above-ground location, allowing service teams to find the source of leaks or blockages quickly and accurately.
More visibility before excavation. Fewer assumptions during diagnosis.
Contact us today to see how the MiniFlex19 can keep your pool season on track 🌊
FIBERSCOPE has added the SoloPRO+ ExZ1 explosion-proof pipe inspection camera to its lineup, delivering ATEX Zone 1–certified safety for inspections in hazardous environments. Designed for the oil, gas, mining, wastewater, and petrochemical sectors, the system enables high-resolution pipeline inspections without shutdowns, nitrogen purging, or the risks associated with manual entry.
At the core of the system is the CCU210-ExZ1 control unit, featuring an ATEX Override Key that instantly cuts power if any safety issue is detected. Users can choose between two nitrogen-pressurized camera heads—the CAM025 Self-Leveling Axial or the CAM026L Pan & Tilt with Laser—for accurate diameter and defect measurements. The 8-inch sunlight-viewable display, built-in WiFi, and preloaded WinCan software provide efficient reporting and data sharing in the field.
By combining intrinsic safety, rugged construction, and professional-grade imaging, the SoloPRO+ ExZ1 meets strict global standards, including UL Class 1, Division 1 and IECEx. It supports critical inspections across various industries, including hydrogen cooling, biogas collection, and combustible-dust environments in manufacturing.
FIBERSCOPE is an authorized dealer of the SoloPRO+ ExZ1 explosion-proof camera, offering full sales support and technical assistance. To discuss requirements or request a quote, contact Fiberscope at 1-877-613-2210 or visit our website.
Our Strahl HD Well Camera received an upgrade to its reeling system, now featuring an option for an automatic reeling system. This upgrade allows quicker and easier inspection since its now less time-consuming to handle the 200 meter cable. Powered by AC110V-230V, this upgrade makes the usability of the STRAHL HD Well Camera better, making it an even more reliable tool for professionals conducting deep hole inspections. Learn more about how the Strahl HD Downhole Camera can improve your inspections at www.fiberscope.net/downhole-camera-strahl/ or contact us at 1-877-613-2210 or salesteam@fiberscope.net.
Borescopes and Sewer Cameras
Quick question for plumbing professionals:
What should be given the most importance when choosing a drain inspection camera?
A) Image quality
B) Cable length
C) Flexibility through tight bends
D) Camera head size
Here’s something worth considering:
A camera will not be much helped even if it has a long push cable and good image quality since the camera cannot reach the inspection area.
The MiniFlex 2 19mm is designed to be used with pipes having a small diameter and for difficult bends, for example the ones present in some P-trap setups.
Because of its flexible neck it is able to handle difficult routes, and the built-in 512 Hz sonde enables the position of the camera head to be determined using a locator.
Curious how it works?
Explore the MiniFlex 2:
www.fiberscope.net/plumbing-inspection-camera-mini…
I'd like you to leave your answer in the comments.
#DrainInspection #PlumbingCamera #Fiberscope #inpsectioncamera #ndt
2 weeks ago | [YT] | 0
View 0 replies
Borescopes and Sewer Cameras
Would you rather pay for an inspection camera or pay for the guesswork?
When the problem is inside a pipe, behind a wall, inside a machine, or somewhere you simply can’t see, the right inspection camera can change the job completely.
Our Clearance Collection makes professional inspection equipment easier to put to work without paying regular price.
You’ll find selected:
🔎 Video borescopes
🔄 Articulating borescopes
🚰 Drain inspection cameras
📹 Fiberscopes
🛠️ Probes and accessories
Some systems are currently discounted by thousands of dollars.
If you’ve been putting off an equipment upgrade, check the available inventory before your preferred configuration is gone.
👉 SHOP CLEARANCE:
store.fiberscope.net/en-ca/collections/clearance
#Borescope #InspectionCamera #DrainCamera #IndustrialInspection #VisualInspection
4 weeks ago | [YT] | 1
View 0 replies
Borescopes and Sewer Cameras
What would you like to see next on our channel?
1 month ago | [YT] | 1
View 0 replies
Borescopes and Sewer Cameras
⚠️ Can you use a standard inspection camera in a hazardous environment?
Image quality and reach are only part of the equation. In areas where flammable gases or vapors may be present, the inspection equipment must also be suitable for the operating environment.
Different access challenges require different solutions:
🔍 VIDEOSCOPE XT: close-range inspection inside machinery and vessels
🔍 SoloPRO+ ExZ1: ATEX Zone 1 push camera for 2–24" pipelines and working lengths up to 330 ft (100 m)
🔍 Proteus ExZ1: robotic crawler for larger and longer pipelines
The right choice depends on where you’re inspecting, what you need to reach, and the hazardous-area requirements.
Learn more:
www.fiberscope.net/hazardous-location-inspection/
📞 1-877-613-2210
#NDT #ExplosionProof #Borescope #PipelineInspection #RVI
1 month ago | [YT] | 2
View 0 replies
Borescopes and Sewer Cameras
Finding a defect is one thing. Measuring it accurately is what helps you decide what to do next.
Meet the FIBERSCOPE iX3D 3D Measurement Video Borescope, designed for remote visual inspections where defect dimensions matter.
Using stereo vision, iX3D generates 3D surface data inside hard-to-reach components. Inspectors can measure length, depth, height, distance and area, then visually check how the measurement was made.
In this video, see how iX3D helps make 3D measurement practical in the field:
🔹 6 measurement methods: Point to Point, Point to Line, Point to Plane, Multipoint, Max Point to Line and Plane
🔹 360° 3D model: rotate and zoom the inspected surface to verify measurement-point placement
🔹 Color-coded 3D depth map: visualize changes in surface geometry
🔹 Measurement-data check: areas without sufficient 3D data are highlighted
🔹 0° and 90° stereo probes: switch between forward and side views for different inspection geometries
🔹 4 mm and 6 mm probes: with four-way articulation and working lengths up to 7.5 m
🔹 Fast workflow: measurement results in less than one minute
iX3D is designed for demanding NDT and RVI applications, including aircraft engines and turbines, helicopter gearboxes, pipelines, heat exchangers, wind turbines, gas turbines, power-generation equipment and production facilities.
When a conventional borescope can show you where the defect is, iX3D helps answer the next question:
How big is it, and can you verify the measurement?
Learn more about the FIBERSCOPE iX3D at FIBERSCOPE.net.
#NDT #Borescope #Videoscope #RVI #RemoteVisualInspection #3DMeasurement #IndustrialInspection
2 months ago | [YT] | 2
View 0 replies
Borescopes and Sewer Cameras
You can see the blockage—but how far into the pipe is it?
Estimating distance from a zoomed image can lead to unnecessary crawler deployment, poorly targeted cleaning or another visit to the same manhole.
The CYCLOPS TZ now comes with a preinstalled laser rangefinder. It helps crews connect a visible observation to a target-distance reference during sewer mainline, storm drain, and culvert screening.
First, find the problem with Full HD imaging and 30× optical zoom. Then determine where it is before deciding which equipment to bring next.
Would distance information change how your crew plans preliminary inspections?
See the CYCLOPS TZ:
www.fiberscope.net/manhole-camera-cyclops-tz/
#SewerInspection #CYCLOPSTZ #ManholeCamera #SewerInspectionCamera #StormDrainInspection #CulvertInspection #PipelineInspection #maintenanceholeinspection
2 months ago | [YT] | 1
View 0 replies
Borescopes and Sewer Cameras
When Conventional CCTV Crawlers Stop, What Comes Next? 🌊🤖
Flooded pipelines, active flow, heavy sediment, and large-diameter sewers can quickly turn a routine inspection into a costly challenge. When a crawler loses traction, valuable condition data can be lost before the inspection is even complete.
The TRACER X20 Floating Pipe Inspection Robot was designed for exactly these environments. Its patented Archimedes screw floating propulsion system helps navigate conditions where traditional wheeled crawlers may struggle, while the HD PTZ camera, optional Sonar, and 2D LiDAR provide detailed inspection data for informed maintenance decisions.
Whether you're inspecting municipal sewers, stormwater systems, siphons, or large pipelines, the goal remains the same: collect reliable data with fewer limitations in the field.
Learn more about the TRACER X20:
👉 www.fiberscope.net/tracer-x20-floating-pipe-inspec…
🔗Fiberscope.net | 1-877-613-2210 | salesteam@fiberscope.net | fiberscope.net
Have you ever encountered an inspection where high water, sediment, or active flow prevented your crawler from reaching the target area?
4 months ago | [YT] | 1
View 0 replies
Borescopes and Sewer Cameras
‼️Summer is the busiest season for pool service teams — and the worst time for a pool to go down.
When an in-ground pool loses water or shows signs of a blockage, the real challenge is locating the problem before you dig. Underground pool piping runs through tight elbows and multiple 90° bends — exactly where most inspection cameras stop short.
The MiniFlex 19 was built to tackle these challenges. Its patented flexible neck moves smoothly through consecutive bends in small-diameter pool piping—places other cameras cannot reach. The built-in 512 Hz sonde enables precise above-ground location, allowing service teams to find the source of leaks or blockages quickly and accurately.
More visibility before excavation. Fewer assumptions during diagnosis.
Contact us today to see how the MiniFlex19 can keep your pool season on track 🌊
🔗 fiberscope.net/plumbing-inspection-camera-miniflex
#PoolService #LeakDetection #PipeInspection #PlumbingTools #FIBERSCOPE #PoolMaintenance #PoolRepair #InspectionCamera #PoolProfessionals
4 months ago | [YT] | 1
View 0 replies
Borescopes and Sewer Cameras
FIBERSCOPE has added the SoloPRO+ ExZ1 explosion-proof pipe inspection camera to its lineup, delivering ATEX Zone 1–certified safety for inspections in hazardous environments. Designed for the oil, gas, mining, wastewater, and petrochemical sectors, the system enables high-resolution pipeline inspections without shutdowns, nitrogen purging, or the risks associated with manual entry.
At the core of the system is the CCU210-ExZ1 control unit, featuring an ATEX Override Key that instantly cuts power if any safety issue is detected. Users can choose between two nitrogen-pressurized camera heads—the CAM025 Self-Leveling Axial or the CAM026L Pan & Tilt with Laser—for accurate diameter and defect measurements. The 8-inch sunlight-viewable display, built-in WiFi, and preloaded WinCan software provide efficient reporting and data sharing in the field.
By combining intrinsic safety, rugged construction, and professional-grade imaging, the SoloPRO+ ExZ1 meets strict global standards, including UL Class 1, Division 1 and IECEx. It supports critical inspections across various industries, including hydrogen cooling, biogas collection, and combustible-dust environments in manufacturing.
FIBERSCOPE is an authorized dealer of the SoloPRO+ ExZ1 explosion-proof camera, offering full sales support and technical assistance. To discuss requirements or request a quote, contact Fiberscope at 1-877-613-2210 or visit our website.
10 months ago (edited) | [YT] | 2
View 0 replies
Borescopes and Sewer Cameras
Our Strahl HD Well Camera received an upgrade to its reeling system, now featuring an option for an automatic reeling system. This upgrade allows quicker and easier inspection since its now less time-consuming to handle the 200 meter cable. Powered by AC110V-230V, this upgrade makes the usability of the STRAHL HD Well Camera better, making it an even more reliable tool for professionals conducting deep hole inspections. Learn more about how the Strahl HD Downhole Camera can improve your inspections at www.fiberscope.net/downhole-camera-strahl/ or contact us at 1-877-613-2210 or salesteam@fiberscope.net.
1 year ago (edited) | [YT] | 2
View 0 replies
Load more